ASM 14-2; 14-2 PC
7. Assembly
Fitting the foil conductor
3
4
5
2
1
1
1. Route the foil conductor as shown in the photo.
Insert the foil conductor into the guide (1).
2. Connect the foil conductor to the electronics (2).
3. Insert the LED indicator (3) into the cut-out provided.
4. Insert the switch trigger (4).
5. Lay the LED (5) in place.
All rights reserved by FEIN, especially in case of patent applications.
C-SC_CSSM
VERSION 1.0
2015-04-08
25/30
FEIN retains all rights of disposal, such as copying and circulation.