Vitek VT-1511 BK Betriebsanweisung Seite 7

14. Make procedures in paragraphs 10 and
11at least 3 times.
15. Repeat cleaning of steam output chan-
nels, described in paragraph 12.
16. With small intervals, repeat the boiler
cleaning procedure (paragraph 10) till
citric acid solution completely resolves
in the tank.
17. Switch on the coffee maker, by press-
ing the (17) ON/OFF button.
18. Fill the tank (3) with clear water till the
maximal level and repeat paragraphs
10, 12 at least 3 times, without 10-15-
minute interval.
19. Switch off the coffee maker, by press-
ing the (17) ON/OFF button.
Note:
- To remove scale you can use special
substances for scale removal, strictly fol-
lowing the instructions on their usage.
Problems, their causes and solutions
Problem
The coffee maker does
not switch on
Water leaks away from
the lower part of the unit
Coffee leakage from the
filter holder
Coffee made has a
strange odor
Steam does not whisk
milk
VT-1511 IM.indd 7
Cause
No voltage in the socket.
Power plug is not completely in-
serted into the socket.
The tray is full.
Filter does not join firmly the densi-
fier in the boiler, ground coffee got
on the edges of the filter.
Wrong process of scale removal in
the boiler
Improper storage of coffee
Low temperature of the outgoing
steam
The tank is too large or its size is
improper
You have used skimmed milk
ENGLISH
CLEANING
- Filter cleaning (6): you can wash filter
in a dishwashing machine. If the open-
ings are blocked with the rest of ground
coffee, you can clean them with a small
brush.
- Wipe the housing of the coffee maker
with a damp soft cloth. Do not use metal
brushes and abrasives.
- Do not immerse the unit into water or
other liquids.
- Wash removable parts with warm water
and wipe them with a dry cloth.
Drops tray (9)
- Remove the grid (10) from the tray (9),
remove the tray (9) and pour out water,
put the tray on its place, put the grid on
the tray. If necessary wash the tray (9)
and the grid (10) in water with soft deter-
gent, rinse and dry.
Make sure that the socket is in op-
erating position.
Check whether the plug is com-
pletely inserted into the socket.
Pour out water from the tray
Clean the edges of the filter.
Refer to "Preparation to operation",
"Scale removal" paragraph and
repeat them several times.
Use fresh ground coffee.
Keep coffee in a dry cool place
Whisk milk only after the indicator
(15) lights up.
Use narrow high container to whisk
milk
Use whole milk only, with fat status
4-6%.
7
Solution
12.04.2012 10:08:22