Wear Parts - Oase biOrb Gebrauchsanleitung

- EN -
– After display of the water temperature,
the red LED on the sensor is lit until the wa-
ter reaches the specified temperature of
24.5 °C.
• Switching off: Disconnect the unit from the
mains.
CLEANING
If necessary, clean the unit with clear water using
a soft sponge or cloth.
20
N O T E
• Switch off the heater and allow it to cool
down before removing it from the water.
• If the heater is accidentally removed from the
water without being switched off before-
hand, it switches off automatically.
• Do not leave the heater unattended after re-
moving it from the water.
• Do not not use cleaning agents or chemical
solutions.

WEAR PARTS

The following components are wear parts and
are excluded from the warranty:
• Suction cup
biOrb Intelligent Heater