Product Description; Installation And Connection - Oase biOrb Gebrauchsanleitung

- EN -

PRODUCT DESCRIPTION

• Check that the delivery scope is correct, com-
plete and undamaged.
 A biOrb Intelligenter Heizer
1 Operating manual of the intelligent
heater
2 Sensor
3 Heater
4 PowerPod
5 Sensor cover
6 Suction cup
W A R N I N G
Danger of suffocation.
Keep plastic bags and small parts out of reach of
babies and young children.
Intended use
The intelligent heater comprises these compo-
nents that may only be used as specified in the
following:
PowerPod: For supplying power to:
• The supplied heater
• A biOrb lighting unit
• A biOrb aerator pump
18
Heater with sensor: For heating and monitoring
the temperature of a biOrb aquarium.
• Only operate with water at a water tempera-
ture of +4 °C to +35 °C.
• Operation under observance of the technical
data.
The following restrictions apply to the units:
• Only use indoors and for aquaristic purposes
in the home (not for commercial use).
Function description
Heats the aquarium water to 24.5 °C. Monitors
and keeps this temperature constant.

INSTALLATION AND CONNECTION

Setting up and connecting the heater
N O T E
• Do not connect the heater until it is com-
pletely immersed in water.
• Ensure that the heater does not make contact
with the acrylic wall of the aquarium.
N O T E
The desired water temperature can only be
achieved if the heating capacity of the heater is
biOrb Intelligent Heater