Mains Connection - Renkforce GM115-25210 Bedienungsanleitung

10. Mains Connection

The mains socket to which the effect light is connected must be close to the device and easily
accessible to quickly separate the device from the mains voltage in case of an error.
Do not let the mains cable come into contact with other cables.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electric shock.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Before plugging in the mains plug, ensure that the device voltage indicated at the effect light
corresponds to the available mains voltage. Do not connect the device if the indication does
not correspond to the available mains voltage. Incorrect supply voltage may lead to irreparable
damage to the device and danger to the user.
When connecting additional devices to the mains connection OUT (6), never overload this con-
nection. The total power input of the devices connected to this connection must not exceed 7 A.
Never connect devices with a higher current consumption, such as amplifiers, fog devices, etc.,
to the OUT (6) mains connection.
• Connect the mains cable low-voltage plug to the mains connection IN (1) at the device.
• If you want to supply further LED bars with power, you can connect them to the mains connection
OUT (6).
• Plug the mains plug of the mains line into a grounded socket.
• Once the device is connected to the mains socket, it takes up operation.
31