Renkforce FL-01RG Bedienungsanleitung Seite 24

• If possible, route the laser beam so that it will not run on eye level.
• Caution - if proceeding in a different way or using any other controls than those specified in this
manual, you may expose yourself to hazardous radiation.
• This product is equipped with a class 3R laser. The scope of delivery includes laser warning
signs in different languages. If the signage on the laser is not in your local language, attach the
corresponding signs to your laser.
Laser warning sign:
Mark at the laser aperture:
• Never look straight into the laser light source during operation. The bright light flashes may
temporarily impair your eyesight. Apart from this, epileptic fits may be triggered under certain
circumstances in persons sensitive to such lights. This particularly applies to epileptics.
• The device contains no parts that require servicing by the user. Therefore, never open the
device.
• Never plug in or unplug mains adapters or mains plugs when your hands are wet.
• Never disconnect mains adapters and mains plugs from the mains socket by pulling at the
cable. Always pull it out of the mains socket holding it by the contact surfaces provided for this
purpose.
• For safety reasons, disconnect the mains adapter from the mains socket in case of an electri-
cal storm.
• Make sure that the mains adapter cables are not squeezed, bent, damaged by sharp edges or
put under mechanical stress. Avoid excessive thermal stress from extreme heat or cold on the
mains cables. Do not modify the mains cables. Otherwise the mains cable may be damaged. A
damaged mains unit can result in a life-threatening electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
(e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
• The device is not a toy. Children and teens cannot judge the dangers involved when handling
electrical devices and lasers.
• Do not leave any packaging material unattended. It may become a dangerous toy for children.
24