Notes; Safety Notes; General Safety Notes - TESTBOY Profi III LCD+ Bedienungsanleitung

Notes

Safety notes

General safety notes

Please observe the five safety rules:
1.
2.
3.
4.
5.
®
Testboy Profi III LCD+
WARNING
Sources of danger are mechanical parts, for example, which can cause serious per-
sonal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury, and also functional
damage to objects (e.g. damage to the instrument).
WARNING
Never point the laser beam/ LED beam towards the eyes directly or indirectly, via re-
flective surfaces. Laser radiation can cause irreparable damage to the eyes.
WARNING
Unauthorised modification and/or changes to the instrument are not permitted, for reasons
of safety and approval (CE). In order to ensure safe and reliable operation using the in-
strument, you must always observe the safety instructions, warnings and the information
contained in the section „Intended use".
WARNING
Please observe the following information before using the instrument:
Do not operate the instrument anywhere near electrical welders, induction heaters
|
or other electromagnetic fields.
Further to abrupt temperature fluctuation, the instrument must be allowed to adjust
|
to the new ambient temperature for approx. 30 minutes before using it, in order to
stabilise the IR sensor.
Do not expose the instrument to high temperatures for a long period of time.
|
| Avoid dusty and humid environments.
| Measuring instruments and their accessories are not toys, and must be kept out of
the reach of children!
| In industrial facilities, the accident prevention regulations for electrical systems and
equipment, established by the employer's liability insurance association, must be
observed.
Disconnect
Ensure that the instrument cannot be switched back on again
Ensure isolation from the power supply (both poles deenergized)
Earth and short-circuit
Cover adjacent live parts
Notes
11