Machine Data - Ferm CSM1043 Originalbetriebsanleitung

PRECISION CIRCULAR SAW
CSM1043 - 500W, Ø85mm
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-4
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always func­
tions properly. The operating instructions
and the accompanying documentation
must be kept in the vicinity of the device.
Introduction
This saw is intended for sawing different types of
thin material for home use. The Precision Circular
Saw can be used when it is necessary to saw
accurately and when it is not desirable to create
any dust, or if there is a risk of sawing pipes or
cables. The Precision Circular Saw is unique
because the material to be sawn is clamped by the
saw between the base plate and the work bench.
The blade is then pushed into the material to be
sawn to produce a quick, easy and clean result.

1. MACHINE DATA

Technical specifications
Voltage
Power
Sawing depth
No load speed
Weight
Max. blade diameter
Bore
Lpa (Sound pressure level)
Lwa (Sound power level)
Hand-arm vibration ah,W
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns
Blade specifications
Included with the machine are three different type
blades:
1 General long-life 24T TCT blade for wood and
plastics
1 Diamond blade for ceramics (dry cut)
1 Fine 44T HSS blade for wood and plastics
Product information
Fig.1-5
1. Protective cover
2. Handle
3. Saw depth limiter
4. On/Off switch
5. Handgrip
6. Rear ventilation hole
7. Speed adjustment
8. Dust extraction pipe
9. Depth indicator
10. Sawblade
11. Cap nut
12. Parallel guide
13. Adjustment knob
14. Spindle lock button
230-240 V~50 Hz
15. Mounting flange
500 W
16. Clamping nut
0-22 mm
17. Hex key
3500-6500/min
1.7 kg
85 mm
15 mm
95 dB(A) K=3 dB(A)
106 dB(A) K=3 dB(A)
2.63m/s K=1,5m/s
2 2
5