Bosch PCM 800 SD Originalbetriebsanleitung Seite 25

OBJ_BUCH-2765-002.book Page 25 Tuesday, July 25, 2017 2:28 PM
 If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not make any modifications to the laser equipment.
 Never make warning signs on the machine unrecognis-
able.
 Do not use dull, cracked, bent or damaged saw blades.
Unsharpened or improperly set saw blades produce nar-
row kerf causing excessive friction, blade binding and kick-
back.
 Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
 Always use blades with correct size and shape (dia-
mond versus round) of arbour holes. Blades that do not
match the mounting hardware of the saw will run eccentri-
cally, causing loss of control.
 Do not touch the saw blade after working before it has
cooled. The saw blade becomes very hot while working.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more safely.
Symbols and their meaning
 Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in con-
tact with the saw blade.
 Wear a dust respirator.
Bosch Power Tools
Symbols and their meaning
 Wear safety goggles.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Laser Radiation
Do not stare into beam
Class 2 laser product
 Danger area! Keep hands, fingers or
arms away from this area.
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. If it is necessary to
use reducers, ensure that the dimensions
of the reducer are suitable for the base
blade thickness and the saw blade hole di-
ameter, as well as the tool spindle diame-
ter. Wherever possible, use the reducers
provided with the saw blade.
English | 25
To set horizontal mitre an-
gles, the saw table has to
be turned with the lever
pulled until the angle indi-
cator displays the re-
quired mitre angle.
The adjustable fence
must be pulled outward
when sawing bevel an-
gles.
The cutting line can be in-
dicated by the laser beam
on either the left or right
of the saw blade.
1 609 92A 3VU | (25.7.17)