TELECOMANDO 40176 Bedienungsanleitung Seite 35

REMOTE CONTROL
°
°
°
M-3-2 PROGRAM DAY (ONLY HYDRO DEVICE)
In this menu you can set No. 2-cycle On and Off delimited by the set time (00:00 to 23:50 - OFF where the OFF
setting tells the clock to ignore the command) valid for all the day of week (from monday to sunday).
°
M-3-3 WEEK PROGRAM
In this menu you can set No. 4 cycles on and off delimited by the set time (00:00 to 23:50 - OFF where the OFF
setting tells the clock to ignore the command). Each of these cycles can be activated (ON) or disabled (OFF) for the
weekdays you want.
°
°
°
Until to....
Until to....
EN
35