Instructions For Infra-Red Remote Control - Telecomando 40176 Bedienungsanleitung

EN
24

1. INSTRUCTIONS FOR INFRA-RED REMOTE CONTROL

The remote infra-red (IR) can reach the unit in 7 meters and must be pointed in direction on the display pannel on
board.
REMOTE CONTROL FUNCTIONS FOR AIR DEVICES:
› Button 1
Increase or reduce the room temperature from +7°to +40°c.
› Button 6
Increase or reduce the power from 1 to 5.
› Button 3
Pressed button 3 for 3 seconds you switched on,
Again for 3 second you switched off.
› Button 4
You access the menu of the device.
REMOTE CONTROL FUNCTIONS FOR WATER-DEVICES:
› Button 1
Increase or reduce the water temperature from +30°C to +80°C.
› Button 2
Press button 2 and then use button 1 and 2 for increase or reduce the room temperature from
+7°to +40°c.
› Button 5
Press button 5 and then use the button 5 and 6 to change the fun speed.
› Button 6
Press button 6 and then use button 5 or 6 for increase or reduce the power from 1 to 9.
› Button 3
Pressed button 3 for 3 seconds you switched on,
Again for 3 second you switched off.
› Button 4
You access the menu of the device.
Do not place the remote control near the appliance or near other heat sources: maximum distance between the
remote control and unit max 7 meters without obstacles (walls). The remote control must be handled with care, be
kept away from children and protected from the elements (sun, rain). The remote control is supplied with 12V battery
type CR2025 3V that must be replaced annually or needs. Remove the cover on the back of the remote control for
the insertion and replacement of batteries that must be disposed of properly (contact your local recycling waste in
their community).
and 2 - SET. TEMPERATURE ROOM
and 5 - SET. POWER
- SWITCHED ON/OFF
- MENU
- SET. TEMPERATURE WATER
- SET. TEMPERATURE ROOM
- AIR FAN (If available on)
- SET POWER
- SWITCHED ON/OFF
- MENU
REMOTE CONTROL