Instructions For Use Of The Console Display Lcd - Telecomando 40176 Bedienungsanleitung

REMOTE CONTROL

2. INSTRUCTIONS FOR USE OF THE CONSOLE DISPLAY LCD

Before switching on the appliance, the display appears as shown below:
Here is the meaning of the warning status on the left side of the display:
Description button
BUTTON
BUTTON 1
For air device: with Button 1 you set the target temperature of the environment, SET TEMP parameter
ENVIRONMENT (see Chapter 5). With a long press they read in sequence: turn the pellet screw, the combustion
power and working status.
For hydro device: with Button 1 you set the target temperature of water supply, WATER SET TEMP parameter
(see Chapter 6). With a long press they read in sequence: turn the pellet screw, the combustion power and working
status.
BUTTON 2
For air and hydro device: with key 2 you set the target temperature of the environment, SET TEMP parameter
ENVIRONMENT (see Chapter 5). With a long press they read the T smoke and the speed of the flue gas fan.
DESCRIPTION
Programmations
Increase
TEMPERATURE
Work / Off
Programmations
Reduce
TEMPERATURE
Work / Off
MODALITY
Change / increment the value of the
selected menu
Increase the value of the desired
temperature ambient/water
Change / reduce the value of the
selected menu
Reduce the value of the desired
temperature ambient/water
1) CLOCK
2) ROOM TEMPERATURE
3) STATE UNIT
4) DIALOG
5) POWER (AIR DEVICES)
5) Water temperature (only with
hydro devices)
1) Chrono
2) Ligther
3) Screw
4) Exhaust fumes
5) Fan air
6) Do not use (air device)
Circulator (hydro devices)
7) Alarm
ACTION
EN
25