Gaggia Milano GAGGIA BRERA Bedienungsanleitung Seite 34

DESCALING
35'
Limescale normally builds up with the use
of the appliance.
The machine must be descaled when the
icon appears on the display.
Steady on
Do not turn the machine off or
put it in stand-by mode during
the descaling process.
Only use the GAGGIA descaling
solution. Its formula has been
designed to ensure better machine
performance and operation for its
whole operating life. If correctly used,
it also avoids alterations in the brewed
product.
Warning! Never drink the
descaling solution or any
products dispensed until the cycle
has been carried out to the end. Never
use vinegar as a descaling solution.
Before descaling the machine, perform
the following operations:
- remove the Pannarello (if supplied)
from the steam wand as described
in the "Cleaning and Maintenance"
chapter;
- empty the drip tray. Place it back in the
machine before proceeding.
1 Place a large container under the
dispensing spout.
Turn the machine off by pressing the
"STAND-BY" button. Wait for the
machine to complete the rinse
process.
• 34 • • 34 •
Warning! Remove the "In-
tenza" fi lter before adding the
descaling solution.
Note: should the containers
fi ll up, temporarily suspend
the dispensing process in order to
empty the containers.
If descaling solution and/or water
spills out of the dispensing spout:
PAUSE: turn the selector switch to the
" " position;
START: turn the selector switch to the
" " position.
If descaling solution and/or water
spills out of the steam wand:
PAUSE: turn the selector switch to the
" " position;
START: turn the selector switch to the
" " position.
2 Pour the entire content of the GAGGIA
concentrated descaling solution into
the water tank and fill it with fresh
drinking water up to the MAX level.
Place the tank back into the machine.
3 Place an empty container under the
steam wand and another one under
the dispensing spout.