Renkforce 808577 Bedienungsanleitung Seite 65

• Use the buttons „2" and „8" to choose the recording to be played back (it is marked in colour).
To delete the selected recording (or to delete all recordings of the respective date/subdirectory),
keep the button „
Then a window „Delete All/Current, Cancel" is displayed.
Use the buttons „2" and „8" to choose between:
„Delete All":
„Delete Current":
„Cancel":
Confirm the selection with „
prompt will appear („Yes" = delete, „No" = cancel). Select your answer as usual with the buttons
„2" and „8" and confirm with „
Attention!
Deleted data cannot be recovered!
• Briefly push the button „
• Pushing „4" or „6" repeatedly permits switching between rewind and fast forward. 2-, 4-, 8- and 20-fold
speed is possible.
The respective current playback speed is displayed at the bottom of the display („X2", „X4", „X8"
or „X20").
The display also shows the overall duration of the recording and the current time position in the
lower right.
If the function „Time Stamp" was on during recording, the upper right of the display shows the
date and time of the recording.
• Push the button „MENU/ESC" on the screen/DVR or the button „MENU" on the IR remote control re-
peatedly if required to stop or terminate playback and to return to the respective previous menu or leave
the OSD menu.
" pushed for about one second.
Delete all recordings
Only delete the currently selected recording
Cancel
". If „Delete All" or „Delete Current" were chosen, a safety
".
" to start or pause playback.
63