Function „Firmware Update; Function „Default Setup; Function „Memory Info - Renkforce 808577 Bedienungsanleitung

Function „Firmware Update"
These functions are used for the firmware update. If the screen/DVR has a firmware update available, this
is provided under www.conrad.com on the corresponding product page.
Proceed as follows:
• Take an empty SD-/SDHC memory card and copy the new firmware on your computer to the ain directory
of the memory card. Insert the memory card into the screen/DVR.
• Have the current firmware version displayed; see function „Version" below.
• Use the buttons „2" and „8" to pick the function „Firmware Update" and then push „
• Use the buttons „2" and „8" to switch between „Yes" (start firmware update) and „No" (cancel).
• Confirm the selection with „
• When the firmware update has been performed, have the new firmware version displayed; see function
„Version" below.
• Push the button „MENU/ESC" on the screen/DVR or the button „MENU" on the IR remote control re-
peatedly to return to the respective previous menu or leave the OSD menu.
Function „Default Setup"
Use this function or recover the basic settings ex works.
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Default Setup" and then push „
• Use the buttons „2" and „8" to switch between „Yes" (reset default settings) and „No" (cancel).
• Confirm the selection with „
• Push the button „MENU/ESC" on the screen/DVR or the button „MENU" on the IR remote control re-
peatedly to return to the respective previous menu or leave the OSD menu.
Function „Memory Info"
Here, both the overall memory of the inserted SD-/SDHC-memory card and the memory still free for recor-
dings can be displayed.
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Memory Info" and then push „
• The screen now shows the overall memory („All") and the free memory („Free").
• Push the button „MENU/ESC" on the screen/DVR or the button „MENU" on the IR remote control re-
peatedly to return to the respective previous menu or leave the OSD menu.
".
".
".
".
".
55