General Safety Instructions - TESTBOY Profi III LED Bedienungsanleitung

Instructions

General safety instructions

Observe the five safety rules:
1. Disconnect
2. Ensure that the instrument cannot be switched on again
3. Ensure isolation from the power supply (check that there is no
4. Earth and short-circuit
5. Cover adjacent live parts
18
WARNING
For reasons of safety and approval (CE) arbitrary conversion
and/or modification to the device are not permitted. In order to
ensure safe and reliable operation using the device, always
observe the safety instructions, warnings and the information
contained in the section "Intended use".
WARNING
Before using the device observe the following instructions:
| Do not operate the instrument near electrical welding
devices, induction heaters or other electromagnetic fields.
| After abrupt temperature changes, the device must be
allowed to adjust to the new ambient temperature for
approx. 30 minutes before using it, in order to stabilise the
IR sensor.
| Do not expose the device to high temperatures for a
extended periods of time.
| Avoid dusty and humid environments.
| Measuring instruments and their accessories are not toys,
and must be kept out of the reach of children!
| In industrial facilities, observe the accident prevention
regulations for electrical installations and equipment,
established by the employer's liability insurance
association.
voltage at both poles)
®
Testboy Profi III LED