WimTec INSIDE Montage- Und Bedienungsanleitung Seite 15

INSIDE
Assembly
1
4
1.
Execute pre-flush with flush piece and tube.
2. Close shut-off valve. Insert dirt filter. Shut down water and power supply.
ATTENTION! Do not restore water supply until mounting of control and ceramics are com-
pletely finished.
3.
Insert magnetic valve and fictions according to illustration.
ATTENTION! Mind flow direction of the magnetic valve.
4.
Open shut-off valve (keep water supply shut down).
5. Adjust sensor siphon length to outlet.
2
5
3
!
ATTENTION!
Following steps must be
done in order as described
necessarily!
Urinal control WimTec INSIDE
EN
15