B) Starting/Stopping The Timer - Conrad Electronic 86 01 02 Bedienungsanleitung

b) Starting/Stopping the Timer

• First change to the countdown timer display mode (e.g. press the "MODE" button repeatedly until the timer symbol "TR"
is displayed).
• Start the timer with the "ST./STP." button. With the same button you can pause the timer during a countdown.
If the timer is paused, it can be reset to the time you originally set using the "LAP/RESET" button (se Chapter 14 a).
• 5 seconds before the completion of the countdown, a short signal tone is emitted once a second.
• When the timer countdown is complete (at "0:00:00") there is a 10 second signal tone. You can stop the signal tone within
that period by pressing any one of the "ST./STP.", "MODE" or "LAP/RESET" buttons.
53