Intended Use; Features; Delivery Content; Explanation Of Symbols - MC Crypt 59 14 65 Bedienungsanleitung

1. Intended use

The LED DMX Effect Light is used to generate light effects in light show equipment, party rooms, etc. and is controlled using the built-in
controller or an external DMX controller. This product is approved for connection to 100 - 270 V/AC, 50/60 Hz only. The DMX connection
may only be connected to suitable DMX controllers. It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided.
For reasons of safety and licensing (CE) it is not allowed to alter respectively modify the product. Another use than the one described above
leads to damages to the product and is also associated with dangers like short circuit, fire, electric shock, etc. The entire product may not be
altered respectively modified and the casing may not be opened. The safety notices have to be observed under all circumstances!

2. Features

• 4-channel DMX control
• Sound-to-light control
• Built-in controller for automated operation without external DMX controller
• Master-Slave Mode
• Long-life LED illuminant

3. Delivery content

• Effect Light
• Mains cable
• Operating instructions

4. Explanation of symbols

This symbol on the device indicates that the user should read and observe these operating instructions before using the
product.
The lightning symbol is intended to warn of the risk of mortal electric shock or the impairment of the device's electric safety.
Never open the device!
An exclamation mark in a triangle indicates important instructions in the operating manual. Carefully read the whole operating
manual before putting the device into operation. It contains important information about correct operation of the device.
The "arrow" symbol indicates special information and advice on operation of the device.
The device must be operated in enclosed and dry rooms only.
The F symbol indicates that the device is suitable for installation on normal flammable surfaces.
This symbol indicates the minimum distance to the illuminated surfaces.
14