Bose FeVac Two Amplifier/Speaker Controller Installationsanleitung Seite 9

The display then shows which output amplifiers are installed and which are not. When installation is
completed, the measured parameters are stored in the FeVac
next time the FeVac One carries out a check, it only tests the installed components for possible errors.
If the system is equipped with e.g. 4 output amplifiers (numbered 1 to 4) and 1 reserve amplifier, the
following displays appear in turn:
AMPLIFIER 1
INSTALLED
AMPLIFIER 2
INSTALLED
AMPLIFIER 3
INSTALLED
AMPLIFIER 4
INSTALLED
AMPLIFIER 5
NOT INSTALLED
AMPLIFIER 6
NOT INSTALLED
RESERVE AMPLIFIER 1
INSTALLED
Starting up
Two and passed to the FeVac One . The
®
9