Connect Power - OHAUS TA152 Bedienungsanleitung

TAJ Carat / Gold Balances
2.3. Transportation Lock, Calibration Lock & Pan Installation
Before using the balance the Transportation Lock must be released. At the bottom of the
balance slide the locking pin to the
If the balance is to be calibrated by the user ensure that the Calibration Lock is set to
position. See Figure 2-2.
Install the metal pan over the plastic sub-platform.
Figure 2-1. Release Transportation Lock.

2.4 Connect Power

A Power Adapter is used to power the balance. Connect the Power Adapter to the power
outlet (see Figure 2-3) and the power plug to the back of the balance (see Figure 2-4).
Figures 2-3. Power Adapter.
For use only with UL or CSA Certified
(or equivalent approved) power
adapter, which is a Class 2 or a
Limited Power Source device.
position. See Figures 2-1.
Figure 2-2. Release Calibration Lock.
Figure 2-4. Power Plug.
EN-3