Operation - Kärcher K 5.610 Originalbetriebsanleitung


Never leave the appliance unattended
when it is in operation.

Make sure that the power cable or exten-
sion cables are not damaged by running
over, pinching, dragging or similar. Pro-
tect the power cable from heat, oil, and
sharp edges.

All current-conducting parts in the working
area must be protected against jet water.

The appliance may only be connected to
an electrical supply which has been in-
stalled in accordance with IEC 60364.

The appliance may only be connected to
alternating current. The voltage must cor-
respond with the type plate on the appli-
ance.

For safety reasons, we recommend that
you operate the appliance only via a
earth-leakage circuit breaker (max.
30 mA).

Cleaning operations which produce oily
waste water, e.g. engine washes, under-
body washes, may only be carried out us-
ing washing stations equipped with an oil
separator.

This appliance was designed to be used
with detergents which are supplied or rec-
ommended by the manufacturer. The use
of other detergents or chemicals may
compromise the safety of the appliance.
Safety Devices
Caution
Safety devices protect the user and must not
be modified or bypassed.
Power switch
The appliance switch prevents unintentional
operation of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appli-
ance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled
the pump is turned on again.
Prerequisites for the appliance's stability
Caution
Create stability for the appliance prior to all
work on or with the appliance to prevent acci-
dents or damage.
The stability of the appliance is warranted
–
when it is placed onto an even surface.
Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness when
unpacking.
In the event of missing accessories or any trans-
port damage, please contact your dealer.
Description of the Appliance

These operating instructions describe the
basic models of the high pressure clean-
ers shown on the front cover.

These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out page!
1 Coupling element for water
connection
2 High pressure hose
3 Quick coupling for high pressure hose
4 Water connection with integrated sieve
5 Appliance switch "0/OFF"/ „I/ON"
6 Dosage regulator for detergent
7 Storage for trigger gun
8 Transport handle, detachable
9 Storage for high-pressure hose
10 Storage of Plug 'n' Clean detergent bottle
with detergent connection
11 Storage for accessories
12 Storage hook for mains connection cable*
13 Plug 'n' Clean detergent bottle with lock-
ing lid
14 Mains cable with mains plug
15 Wheels
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose
– 3
EN

Operation

15