Using The App (Only For Item No. 1593776); A) Connecting To A Mobile Device - Sygonix 1593775 Bedienungsanleitung

• Insert two batteries (2x 1.5 V AA). Ensure
that the batteries are inserted in the
correct polarity (observe the plus/+ and
minus/- signs).
• Replace the front part of the room
temperature controller with the switching
circuit and display.
In principle, it is possible to operate the product with rechargeable
batteries. However, rechargeable batteries have a lower voltage
(rechargeable battery = 1.2 V, conventional battery = 1.5 V) and
a lower capacity, resulting in a shorter battery life. If you wish to
use rechargeable batteries, use special NiMH batteries with a low
self-discharge. For best results, we recommend that you use
high-quality alkaline batteries.
11. Using the app (only for item no.
1593776)

a) Connecting to a mobile device

Install the "Sygonix RT100" app on your mobile device. The app is available for
iOS and Android devices.
If you are using an Android device, check that your device is running
Android 4.2 or later.
Enable Bluetooth on your smartphone. When you open the app, your phone
will automatically search for the room temperature controller and establish a
connection. "Connecting success" will be displayed when a connection is
established. Your phone is now connected to the room temperature controller.
62