Connecting To A Tv; Maintenance And Cleaning - VOLTCRAFT BS-220XIP Bedienungsanleitung

Set the lighting so that the camera image displayed is neither overexposed nor
underexposed.
3. Press the buttons ▲ and ▼ simultaneously to rotate the image by 180º.
Attachments
1. If required, mount one of the three attachments (magnet, hook, mirror) into the small recess below
the camera head.
2. Before use, ensure that the mounting ring of the attachment is locked.
Ring bolt
There is a ring bolt fitted above the monitor. Attach this bolt to a carrying strap (not included), if
required, to facilitate hands-free operation.
10.

ConnECTIng To A TV

When the cover cap has been opened, the base unit is no longer waterproof.
Accordingly, do not expose the base unit to humidity as long as the cover cap is
open.
1. Open the cover cap to the right of the monitor. For this, slide the small lever upwards. Then, slide
the cover cap off to the right and at the same time swing it open.
2. Connect the video cable jack with the matching socket on the endoscope and connect the cinch
plug with the video input of the TV set.
3. This will make the image on the display go off, and the camera image will then be displayed on
the TV screen.
11.

mAInTEnAnCE And CLEAnIng

• The device requires no servicing on your part apart from occasional cleaning. Only use a soft,
anti-static and lint-free cloth for cleaning.
• Do not use abrasive or chemical cleaners.
• Flush the gooseneck camera thoroughly with clean water after each use in liquids and dry it off
before returning it to the case.
• To clean the camera lens, use a small brush or cotton swab.
18