Troubleshooting - VOLTCRAFT PS 250 Wichtige Hinweise

safety instructions. The guarantee will
expire in any such case!
The unauthorized conversion and/or modification of the
product is inadmissible because of safety and approval
reasons (CE).
To ensure safe operation, always observe the safety
instrcutions, warning notes and the chapter "Prescribed
Use"!
An exclamation mark in a triangle stands for impor-
tant notes in the operating manual. Therefore, care-
fully read the operating manual before putting the
product into operation!
The product is no toy! Keep it out of reach of children!
Do not expose the product to mechanical stress. Protect
it against contact with humidity or moisture!
Only use the product outdoors under favorable weather
conditions or with the respective protection.
The electronic Pocket Scale PC is a precise measuring
instrument. Operation near strong electromagnetic radi-
24

Troubleshooting

error indication reasons/solution
Out 1.failure of the weighing process –
remove the weighing material from
the weighing plate (2) and switch
the Pocket Scale off and on again.
2.weighing cell is defective
HHHHHLLLLL 1.main circuit board is defective
2. weighing cell is defective
ErrE Switch the Pocket Scale off and on
UnSt 1.failure of the weighing process –
remove the weighing material from
the weighing plate (2) and switch
the Pocket Scale off and on again.
2.Replace the batteries
EEEEE Check whether the weighing
material is heavier than the
weighing range.
ErrC Check whether the calibration
weight is in the middle of the weig-
hing plate (2) during calibration.
33