Burner Equipment - Riello Burners 565M Montage- Und Bedienungsanleitung

DIMENSIONS
Flange
170
ø
130
Reduction nipple
*
Protrusion obtainable with the special nozzle, to be requested separately.

BURNER EQUIPMENT

Quantity
4 Screws with nuts
1 Insulating gasket
3 Screws for fixing hood
1 Grommet
1 Reduction nipple
1 7 pin plug
ACCESSORIES
SOFTWARE DIAGNOSTIC KIT
A special kit is available that, by an optical link to a PC, shows the burner life together with oper-
ating hours, type and number of lockout, serial number, etc...
Do the following to display the diagnostic:
Connect the kit supplied separately to the appropriate socket on the control box.
The information is read after the software program in the kit is booted.
RESET KIT
The use of a connection available as an accessory is provided for remote resetting of the control
box.
3313
252
25
55
Description
Burner
GB
2
100 230
* 125
Rp 3/8
37
D5061