Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DESCRIPTION OF THE DEVICE
2
SAFETY ROPE
LED
STP-10
Sunbar
POWER IN
100-240 V 50/60 Hz ~
T 1 A, 250 V
4
5
6
(1) Fixation screw
(2) Mounting bracket
(3)
W WW LEDs
(4) Power input
(5) Safety eyelet
(6) Fuse holder
(7) Rotary control for sensitivity
INSTALLATION
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must
never be fixed swinging freely in the room.
1
The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2
Block access below the work area and work from a stable platform when installing the device.
3
Use rigging hardware that is compatible with the structure and capable of bearing the weight of the
device. Please refer to the "Accessories" section for a list of suitable rigging hardware.
4
Secure the device with a safety bond or other secondary attachment. This secondary safety attachment
must be sufficiently dimensioned in accordance with the latest industrial safety regulations and
constructed in a way that no part of the installation can fall down if the main attachment fails. An
appropriate eyelet is mounted on the device for fixation of the safety rope. Fasten the safety rope in such
a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
1
LED STP-10 Sunbar 3200K 10x5W Light Bar 6°
No. 42103491 EAN 4026397626780
60 W T1A,250V
100-240V AC, 50/60 Hz ~
T =45°C
T =55°C
a
C
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbuttelbrunn Germany www.steinigke.de
3
SENSITIVITY
0.2m
MENU
UP
DOWN
ENTER
MIC
7
8
9
(8) Microphone
(9) Display with operating buttons
(10) DMX input
(11) DMX output
(12) Power feed-through output
19/28
DMX OUT
DMX IN
1: Ground
2: Signal (-)
POWER OUT
3: Signal (+)
10
11
00114401.DOCX, Version 1.1
12
Werbung
Inhaltsverzeichnis
