LED STP-10 Sunbar 3200K
10x5W Light Bar 6°
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing. Keep the device away from rain and
moisture.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.
Product features
LED bar with warm white beam effects and narrow beam angle
10 high-power 5 W WW LEDs (3200 K)
•
Each LED can be controlled individually
•
Auto, music, master/slave and DMX mode
•
Built-in auto and music show programs
•
Dimmer and strobe settings
•
Addressing and setting via control panel with 4-digit LED display
•
Sound-control via built-in microphone with adjustable microphone sensitivity
•
DMX512 control possible via any commercial DMX controller
•
1, 3, 5, 10, or 15 DMX channels selectable for various applications
•
Hanging as well as standing installation possible
•
Switch-mode power supply for operation between 100 and 240 volts
•
P-Con power input and feed-through output to power up to 8 devices
•
USER MANUAL
16/28
00114401.DOCX, Version 1.1