Rear Panel - Sony TSL-SA400C Bedienungsanleitung

Rear Panel

24
Chapter 1 Introduction
SCSI CONNECTOR
1
Rotary Selector Switch
Selects the SCSI ID for the drive (page 28).
2
Cooling Fan
3
Power Switch
Press to turn the device on or off.
4
AC IN Connector
Connect the supplied power cable here.
5
FRAME GND (Ground) Terminal
Connect the ground terminals of other devices to the drive's frame
ground.
6
Wide SCSI Connector
Connects to the SCSI bus connector of the host computer or another
SCSI peripheral with a Wide SCSI cable.
1
SCSI ID
0
GND
6 5
AC IN POWER
4 3 2