CAUTION
If the port replicator is connected to the computer, connect the AC adaptor and the LAN cable to the
●
jack and port on the port replicator. You cannot use the LAN port on the computer.
Do not connect/disconnect peripheral devices in sleep (
●
or hibernation.
If devices connected to USB ports (2a, 2b, 2c) do not operate:
●
Confirm the AC adaptor is connected to DC-IN of the port replicator.
•
Try to connect via USB port 1.
•
Windows XP
For recognizing USB devices again, refer to the manual which belongs the computer itself.
When you use the computer that [USB Port] is displayed in [Advanced] menu of the Setup Utility,
●
confirm that [USB Port] is set to [Enable].
For more information about the settings and preparations of the peripheral devices, refer to the
●
peripheral devices' own operating instructions.
When connecting the external display to either of the ports, lines or letters may blur. In that case,
●
lower the resolution.
)/standby (
Windows 7
)
Windows XP
E
11