Using The Garden Spray; Cleaning; Storage; Wall Mounting - FLORABEST FSTK 10 A1 Originalbetriebsanleitung

Using the garden spray

The spray nozzle has 3 different water spray
settings .
The flow rate can be regulated continuously from
closed to open .
♦ Fit the garden spray into the hose connection
(with aquastop) .
♦ Move the rocker
late the water flow .
The rocker can stop the water flow if you
close it completely .
Use this function only for a temporary interrup-
tion of the water flow . Never leave the hose
pipe unattended in such cases .
♦ By turning the spray nozzle
the water jet .
NOTE
► When you remove the garden spray from an
open tap, the hose connection
aquastop) stops the water flow .
Use this option to stop the water flow only if
you want to connect another element to the
hose, e .g . a garden sprinkler .
CAUTION!
► Only use the described option to stop the
water flow for short periods .
If you want to stop the water flow for a
longer period, turn off the tap .
■ 4 │ GB │ IE │ NI
forwards to start and regu-
, you can adjust
(with

Cleaning

■ Clean the housing with a slightly damp, lint-free
cloth .
■ Clean the connections from time to time to en-
sure a tight fit .

Storage

■ Carefully empty the hose and the valves . Store
the product in a frost-free location to prevent
any frost damage .

Wall mounting

NOTE
► The wall mounting is used only for storing the
hose reel on a wall .
► Unroll the supply hose
the hose reel to a wall .
► As soon as the hose reel
wall, it may no longer be used . The hose reel
could come off the wall during use .
♦ To attach the hose reel
figure A (see fold-out page) .
NOTE
► Assembly material is not included .
► Select assembly material in accordance with
the given conditions to ensure that the hose
reel is firmly attached to the wall .

Disposal

Dispose of the product via an approved
waste disposal company or your munici-
pal waste disposal facility . Observe the
currently applicable regulations . Please contact
your waste disposal facility if you are in any doubt .
Dispose of all packaging materials in an environ-
mentally friendly manner .
before attaching
is attached to a
to a wall, follow
FSTK 10 A1