hanseatic JCF-145S Gebrauchsanleitung Seite 51

(24)
6. Unscrew the metal plate for the light
switch (24) from the door frame and
screw it on the door frame of the opposite
side (there are 2 small holes reserved).
Pay attention to the direction when screw-
ing the metal plate.
Set the glass door aside.
(26)
7. Unscrew the three screws (26) on the up-
per hinge (25) and remove it.
8. Unscrew the three screws (26) on the
lower hinge (27) and remove it.
(28)
(28)
9. Remove the three dummy plugs (28) from
the threaded holes above and below and
move them to the opposite side.
(25)
10. Mount the included upper hinge for
changing door hinge (29) on the upper
left side using the screws (26).
Page GB-23
Start-up
(27)
(26)
(29)
(26)