Specifications - Makita DFL650F Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Switch trigger
6 Reversing switch lever
7 Lamp
8 LED indicator
9 Screw

SPECIFICATIONS

Fastening torque
Standard battery cartridge
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
• * No load speed is adjustable with exclusive application.
1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings
futurereference.
4
Explanation of general view
10 Ring
11 Clutch case
12 Scale
13 Hole for adjusting grip
14 Yellow line
15 Adjusting grip
16 Socket
17 Hole
18 Pin
Model
With battery BL1815
With battery
BL1815N / BL1820 /
BL1830 / BL1840 /
BL1850
Square drive
No load speed *
1
Dimensions
Net weight
Rated voltage
and instructions
Hard joint
Soft joint
Hard joint
Soft joint
BL1815, BL1815N,
583 mm x 75 mm x
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
ENE033-1
electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
GEA010-1
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
for
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE
or failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
19 DFL650F with battery BL1815
20 Range of fastening capacity
21 Revolution angle(°)
22 Torque N•m
23 DFL650F with battery
BL1815N, BL1820, BL1830,
BL1840 or BL1850
DFL650F
25 – 58 N•m
25 – 50 N•m
25 – 65 N•m
9.5 mm or 12.7 mm
80 – 200 min
–1
BL1830, BL1840,
BL1820 BL1850
600 mm x 75 mm x
116 mm 116 mm
2.5 kg
D.C. 18 V
2.7 kg
GEB050-2