Wall-Mounting The Base; Connecting The Charger Cradle - Silvercrest SGKT 50 A2 Bedienungsanleitung


Using the supplied telephone cord [G], connect the telephone connection socket [33] on
the back of the base [B] to the telephone wall jack.

Wall-mounting the base

You can also mount the base on the wall. Proceed as follows:

Drill two holes with a vertical distance of 102 mm.

Insert suitable rawlplugs into the drilled holes.

Insert suitable screws into the rawlplugs and turn them in until they protrude approx. 5
mm from the wall.

Hang the base [B] on the screw heads and then pull it downwards until it becomes fixed.

Turn the telephone receiver fixing [30] on the base [B] 180° so you can mount the
telephone receiver.
When wall-mounted, if you wish to put the telephone receiver aside without ending a
phone conversation, you can place the receiver onto the telephone receiver holder [31]
on the base [B].

Connecting the Charger Cradle


Connect the charging cradle plug to a power socket using power adapter [D].
SilverCrest SGKT 50 A2
English - 17