System Pin; Date Time - Silvercrest SGKT 50 A2 Bedienungsanleitung

SilverCrest SGKT 50 A2
Press the  or  buttons on the multifunction control [4] to select the desired option. To save the
selected setting, press the Menu/OK button [12]. A confirmation beep will sound and the "SAVED"
message will appear for a few seconds on the display [2].
The Recall/Flash function on your handset or base allows you to use specific services
for external phone calls, e.g. "Call Waiting". The requirement for this is that your
network provider supports this feature.

SYSTEM PIN

To change the PIN code, proceed as follows:

After confirming by pressing the Menu/OK button [12] the message "OLD PIN-"
appears on the display [2].

Enter the old PIN code (default 0000) and press the Menu/OK button [12] to confirm.

"NEW PIN-" will appear on the display [2]. Enter a new 4-digits PIN code and press the
Menu/OK button [12] to confirm.

"AGAIN-" will appear on the display [2]. Enter the new PIN code again and press the
Menu/OK button [12] to confirm.

A confirmation beep will sound and the "PIN CHANGED" message will appear for a
few seconds on the display [2].

Please make sure you remember the PIN code or keep it in a safe place.
When resetting, the PIN will not be reset. In case that you have lost your PIN, please contact our
Service Hotline (see page 49).

DATE TIME

This menu lets you set the date and time as well as the clock format. To set the date and time,
proceed as follows:

After confirming by pressing the Menu/OK button [12] you can set the year, month, day,
hours and minutes in sequence. Enter the desired value via the numeric buttons [6]. Press
the Menu/OK button [12] to confirm each entry.

A beep will sound after the entire input has been completed.
The setting will be applied to all handsets registered with the base.
26 - English