Calls List; Calling A Phone Number From The Calls List - Silvercrest SGKT 50 A2 Bedienungsanleitung

Calls list

The phone numbers and their associated names in the phonebook, if any, of all incoming calls are
saved in the calls list. The calls list can save up to 30 incoming calls. The requirement for this feature
to work is that your phone line must have the Caller ID function enabled.
A new call will appear with a flashing "CLIP" on the display [17]. The display [17] also tracks the
number of missed calls followed by the message "MISSED". Press the Calls list (Recall/Flash)
button [20] to open the calls list. The last incoming call is shown together with its date and time. If
the calls list is empty, "EMPTY" is shown on the display [17].
Press the  or  multifunction control buttons [16] to scroll through the calls list. To exit the calls
list menu, press the ESC button [14].
If an entry of the calls list is longer than 12 digits or characters, the
appears on the display [17]. Press the  button on the multifunction control [16] to
show the other digits. Now the
button on the multifunction control [16] to show the first digits again.
If the phone number has been saved in the phonebook, the corresponding name
will be shown. Press the  button on the multifunction control [16] to show the
telephone number.

Calling a phone number from the calls list

To dial a phone number from the calls list, proceed as follows:

Press the  or  multifunction control buttons [16] to select the entry that you want to
call from the calls list.

Pick up the receiver to call the selected entry.

To finish the call, put down the receiver again.
icon appears on the display [17]. Press the 
SilverCrest SGKT 50 A2
icon
English - 41