VOLUME
You can adjust the ringer volume in 5 levels (5 = very high; OFF = no ringtone). Press the or
multifunction control buttons [16] to set the desired volume. To save the selected setting, press the
Menu/OK button [15]. A confirmation beep will sound and the "SAVED" message will appear for
a few seconds on the display [17].
KEYPAD BEEP
Press the or multifunction control buttons [16] to enable or disable the keypad beep. To save
the selected setting, press the Menu/OK button [15]. A confirmation beep will sound and the
"SAVED" message will appear for a few seconds on the display [17].
LANGUAGE
Set the menu language for the base as follows:
Press the or directional control buttons [16] to select the desired language (e.g.
"ENGLISH") from the list.
Press the Menu/OK button [15] to confirm your selection.
A confirmation beep will sound and the "SAVED" message will appear for a few
seconds on the display [17].
BASE
This menu allows you to perform more settings for the base.
DIAL MODE
There are two different options you can use.
TONE
Tone dialling is the most popular dialling method nowadays.
PULSE
Pulse dialling is normally used with older PBX devices.
Press the or multifunction control buttons [16] to select the desired option. To save the
selected setting, press the Menu/OK button [15]. A confirmation beep will sound and the "SAVED"
message will appear for a few seconds on the display [17].
RECALL
You can use the Recall/Flash function with the Menu/OK button [12] on your handset or the Calls
list (Recall/Flash) button [20] on the base during a phone call. If your telephone is connected to a
SilverCrest SGKT 50 A2
English - 31