Before You Start; Connecting The Base - Silvercrest SDT 1.7 A3 - IAN 279401 Bedienungsanleitung

Before you start

Connecting the Base

An illustration of the components mentioned below can be found in the Package Contents
section on page 55.

Using the supplied telephone cord [C], connect the telephone connection socket [25] on
the bottom of the base [B] to the telephone wall jack.

Connect the power adapter plug [D] to the power adapter socket [26] on the bottom of the
base [B]. Plug the power adapter [D] into an easily accessible wall outlet.
Please only use the supplied power adapter (manufacturer: Tenpao / model number:
S003GV0500060) for the base.

Secure the cables in the corresponding cable guides [27].
If possible, do not place the base in living rooms or bedrooms. Choose a place where you
are usually not present all the time (e.g. on the corridor). The low-power ECO mode will
already avoid unnecessary exposure to radiation.
SilverCrest SDT 1.7 A3
English - 65