Troubleshooting - Oase AquaMAX 3500 Gebrauchsanweisung

8.0 Trouble shooting
Caution: Follow the safety instructions (section 4.0).
Malfunction
Pump does not turn on
Pump does not displace
water
Insufficient water dis-
placement
The pump turns off after
running for a short time
9.0 Parts subject to wear
Impeller
10.0 Technical data
Aquamax
Nominal voltage [V]
Power consumption in watts [W]
Max displacement [l/min]
Max. displacement height [mdh]
Discharge nozzle connection
Suction nozzle connection
Filter surface [cm²]
Weight [kg]
Cable length [m]
Aquamax 3500 Export NEU.p65
GB Operating instructions
Cause
• There is no power
• Filter housing is blocked
• Rotor is blocked
• Filter housing is blocked
• Excessive loss in the supply
lines
• Water is very dirty
• The water temperature is too
high
11
Remedy
• Check the electrical circuit
• Clean filter housing (section 6.0)
• Clean pump (section 6.2)
• Clean filter housing (section 6.0)
• Reduce hose lengths to the
minimum required, do not use
unnecessary connecting parts
• Clean pump (section 6.0)
• Insure that the water temperature
does not exceed +35°C
3500 5500 10000
AC 230 V/50 Hz
53 75 110
60 92 150
1.6 2.5 3.4
G 1 ½"
G 1 ½"
730
4 4
10.0 10.0 10.0
14.02.2003, 10:50
GB
15000
250
250
5.0
4 4,3
10.0
11