Setting The On-Screen Display (Osd) - Denon AVR-3802 Bedienungsanleitung

Setting the multi vol. level
Set the multi pre-out output level adjustment.
1
At the "System Setup Menu" screen, select
TUNING
"Multi Vol. Level" and press the ENTER
ENTER
button.
BAND MODE
SHIFT
TUNING
2
Select the desired settimg.
TUNING
0 dB, -40 dB:
BAND MODE
The output level is fixed at the set level and the volume can
TUNING
no longer be adjusted.
Variable:
The level can be adjusted freely using the buttons on the
remote control unit.
3
Enter the setting.
ENTER
The "System Setup Menu" reappears.
SHIFT

Setting the on-screen display (OSD)

• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
At the System Setup Menu select "On Screen Display".
TUNING
BAND MODE
TUNING
2
Switch to the On Screen Display screen.
ENTER
SHIFT
3
Select "ON" or "OFF".
TUNING
BAND MODE
TUNING
4
Enter the setting.
ENTER
The System Setup Menu reappears.
SHIFT
Auto tuner preset
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to
8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to
tune in the station, then preset it using the manual "Preset memory" operation.
1
Use the CURSOR buttons to specify "Auto Tuner Presets"
TUNING
from the "System Setup Menu" screen.
BAND MODE
TUNING
2
Press the ENTER button.
ENTER
The "Auto Preset Memory" screen appears.
SHIFT
3
Use the CURSOR button to select "Yes".
TUNING
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
BAND MODE
The display automatically switches to screen.
TUNING
This completes system setup. Once these settings are made, there is no need to change them unless
different AV components are connected or the speakers are repositioned.
ENGLISH
15