Hilti DX 76-PTR Bedienungsanleitung Seite 23

always stopped by the piston brake as it reaches the end of its travel, excess energy is absorbed by the tool.
Accordingly, when the tool is used correctly, dangerous through-shots become virtually impossible.
2.3 Drop-firing safety device
The drop-firing safety device is the result of coupling the firing mechanism with the cocking movement. This
prevents the tool from firing when dropped onto a hard surface, no matter at which angle the impact occurs.
2.4 Trigger safety device
The trigger safety device ensures that a fastener cannot be driven simply by pulling the trigger only. The tool
must be pressed against a firm surface before a fastener can be released.
2.5 Contact pressure safety device
The tool can be fired only when pressed fully against a firm surface with a force of at least 50 N.
2.6 Unintentional firing safety device
The tool is also equipped with an unintentional firing safety device. This prevents the tool from firing if the
trigger is first pulled and the tool then pressed against the work surface. The tool can be fired only when it is
first pressed correctly against the work surface and the trigger subsequently pulled.
2.7 DX 76 PTR tool: applications and suitable fasteners
Fastening profile metal sheet to steel, steel thickness 6 mm – solid steel
Items required
Fasteners
Fastener magazine
Piston set
Items required
Fasteners
Single fastener guide
Fastening profile metal sheet to steel, steel thickness 3‑6 mm
Items required
Fasteners
Fastener magazine
Piston set
Items required
Fasteners
Single fastener guide
Fastening shear connectors
Items required
Fasteners
Ordering designation
X‑ENP‑19 L15 MX
MX 76‑PTR
X‑76‑P‑ENP‑PTR
Ordering designation
X‑ENP‑19 L15
X‑76‑F‑15‑PTR
Ordering designation
X‑ENP2K‑20 L15 MX
MX 76‑PTR
X‑76‑P‑ENP2K‑PTR
Ordering designation
ENP2K‑20 L15
X‑76‑F‑15‑PTR
Ordering designation
X‑ENP‑21 HVB
Comments
10 fasteners per magazine
strip
Comments
Single fastener
Comments
10 fasteners per magazine
strip
Comments
Single fastener
Comments
2 fasteners per shear con-
nector
23
en