Switching Lights On Permanently; Setting The Brightness For The Permanent Lighting Function - Gaggenau RW 404 Gebrauchs- Und Montageanleitung

5. Press the Fan button to confirm the new setting.
The display shows a flashing h".
6. Press the On/Off button to exit Setting mode.
After approx. 1 minute, the display brightness changes
to the new setting.

Switching lights on permanently

H Press the interior lighting button.
The symbol for interior lights permanently on appears
on the display.
To switch off the permanent lighting function, press the
interior lighting button again.
40
Setting the brightness for the
permanent lighting function
1. Press the interior lighting button.
The symbol for interior lights permanently on appears
on the display.
2. Press and hold the interior lighting button.
3. Press the Plus or Minus button to the left of it to set
the desired brightness.
4. Release the interior lighting button.
5. If required, press the interior lighting button again to
switch off the permanent lighting function.