Bluetooth Mode - Grundig TR 2500 DAB+ Handbuch

BLUETOOTH­MODE
Bluetooth­device­compatibility
Your TR 2500 connects with all Bluetooth devices
that support the A2DP profile including the most
smartphones, laptops and tablets.
Selecting­the­input­source­Bluetooth
1
Select the input source DAB with
Alarm«.
– Display: »Bluetooth« and
»Searchin g «.
Pairing­Bluetooth­device
1
Activate on the Bluetooth device the Bluetooth
function.
2 Start on the Bluetooth device the search func-
tion.
– After a short period of time, your TR 2500 is
displayed on the Bluetooth device.
3
Select the TR 2500 on the Bluetooth device
and connect it.
4 Once the Bluetooth device is connected to
your device, the TR 2500 will display »Blue-
tooth« and »Connected«.
Note:­
Although the TR 2500 can only stream audio
7
from one device at a time, it is capable of
being paired with up to eight devices.
Connecting­a­paired­Bluetooth­
Device
Notes:­
You will only need to pair your Bluetooth de-
7
vice with the unit one time.
The next time your Bluetooth device and the
7
TR 2500 are in range of each other, and the
Bluetooth feature is turned on, they will auto-
matically connect.
The TR 2500 will only automatically connect to
7
the last Bluetooth Device it was connected to.
If your paired device does not automatically
7
­---------------------------------------------------------------------------------------------------
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
Play­Audio­signal­from­your­Blue-
tooth­device
1 Start playback on the Bluetooth Device.
2
Adjust the volume using »–­­+«.
3 End playback on the Bluetooth Device.
Notes:­
Various functions may also be controlled
»Mode/
7
from the TR 2500. Select Playback-Pause
using
to resume playback; select previous title by
pressing »
by pressing
Keep in mind that depending on the used
7
Bluetooth device and the structual conditions
the wireless range can be up to 9 m.
Disconnect­the­Bluetooth­device
1 Switch off the Bluetooth function at the Blue-
tooth device or press at the TR 2500 »Menu«
and confirm with »Select/i«.
– Display changes to: »Searchin g «.
Reconnecting­the­Bluetooth­device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2
To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the TR 2500.
Note:­
In case of the registered TR 2500 can-
7
not connect to the Bluetooth device again,
please remove the TR 2500 from the Blue-
tooth device list, search and connect again.
Automatic­shutdown
If Bluetooth is selected as input source and no Blue-
tooth device is connected, the TR 2500 switches
automatically to Stand-by mode after 15 minutes.
»+5­ ­ e II« , press »+5­ ­
­Tuning/Skip«, select next title
r
»Tuning/Skip­
ENGLISH
e II« again
«.
e
25­ ­