Cleaning And Care; Storage - Silvercrest SEMD 12 A1 Bedienungsanleitung

Cleaning and care

RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains
power socket before you clean the appliance.
Ensure you never submerse the motor
unit 2 in liquid, and never allow liquid
to enter the motor unit housing 2.
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic
cleaning agents to clean this appliance.
They can cause damage to the surfaces.
► Do not clean the components of this appliance
in a dishwasher!
♦ If assembled, take the appliance apart to clean it.
–
Turn the rotary switch 9 to
the lid 5 with the motor unit 2.
–
Rotate the lid 5 together with the motor
unit 2. Press the two catches on the motor
unit 2, which project through the lid 5,
gently inwards and push them out of the
lid 5 at the same time. The motor unit 2
will now detach from the lid 5.
–
Pull the drive shafts 3 out of the motor unit 2.
–
Take the ice scrapers 7 out of the beakers 8.
–
Remove the beakers 8 from the base 0.
SEMD 12 A1
Clean the motor unit 2 with a moist cloth after
♦
every use. If there is heavy soiling, add mild
detergent to the cloth. Rinse detergent residues
off with clear water. Ensure that there are no
detergent residues on the appliance, and that the
appliance is completely dry before renewed use.
Allow the beakers 8 to warm up to room tem-
♦
perature before cleaning them.
Wash the beakers 8, the drive shafts 3, the
ice scraper 7 and the lid 5 in lukewarm water
with a little washing-up liquid. Afterwards, rinse
these parts with plenty of clean water to remove
all detergent residues.
Wipe the base 0 with a damp cloth. If there is
♦
heavy soiling, add mild detergent to the cloth.
♦ Ensure that all parts are completely dry before
re-use.

Storage

to remove
♦ Always clean the appliance thoroughly before
storing.
♦ Store the appliance in a clean and dry location.
GB
IE
7