Working With The Garden Shredder - ATIKA ALF 2600 Originalbetriebsanleitung

On / Off switch
Do not use any device where the switch can not be switched
on and off. Damaged switches must be repaired or replaced
immediately by the customer service.
Switch on
Press the green button
Switch off
Press the red button .
Restart protection in case of power failure
In case of a power failure, the device switches off automatically
(zero-voltage initiator). To restart, press the green button again.
Motor protection
The motor is equipped with a safety switch and switches off au-
tomatically when overloaded. After a cooling-down break (approx.
5 min), the motor may be restarted. Press the
1. reset button (motor protection)
2. green button
Direction of rotation selector switch
Only actuate the direction of rotation selector switch
while the shredder is switched off.
Position
The material is drawn in by the cutting roller and shredded.
Position
The blades operate in the opposite direction and jammed material
is released.
Keep depressing the green button of the on/off switch once you
have placed the direction of rotation selector switch into the
position. The cutting roller is placed into the opposite direction. If
you release the on/off switch, the shredder automatically stops.
.
to restart.
Hints
Large objects or pieces of wood may be removed after the

shredder has been operated several times both in cutting
and in release direction.
Use a tamper or hook to remove jammed objects from the

hopper or ejection slot.
Always wait until the shredder has come to a complete
standstill before restarting it.
Retaining basket
The integrated retaining basket is equipped with a locking
lever and a safety cut-out device.
Power off the device before attaching or removing the re-

taining basket.
 Retaining basket locked and fixed connected to
the device.
 Retaining basket unlocked and disconnected from
the device. The device cannot be powered up.
When the retaining basket is unlocked while the

device is operating the device is automatically cut
out.

Working with the garden shredder

 Choose a working position alongside the equipment.
 Provide a safe standing position and keep at any time the
balance. Do not lean forward. When placing material into the
shredder, always stand on the same level as the machine.
When placing material into the shredder, always stand on the
same level as the machine.
 Always keep away from the ejection area when starting the
machine.
Longer material that is protruding from the device

could spring back when it is drawn in by the blades! Ob-
serve safety distance!
 Never reach into the filling or ejection opening.
 Keep your face and body away from the filling opening.
 Never place hands, other parts of the body or clothing into the
filler funnel, ejection channel or in the vicinity of other moving
parts.
 Check before powering the device up that:
no material residues are in the filling hopper,
−
the retaining basket is locked.
−
 Do not tilt or transport the machine (relocation) while the mo-
tor is running.
 Make sure that the motor is free from waste material and
other material accumulation to protect it against damage and
to prevent fire.
 When filling, be careful that no pieces of metal, stones, bottles
or other objects unintended for processing, enter the filling
hopper.
 Power off the machine before attaching or removing the col-
lecting bag. Power off the machine before attaching or remov-
ing the collecting bag.
15