Specification - Wohler SP 22 Bedienungsanleitung

1. Specification

Wöhler Technik GmbH
Schützenstraße 41
D - 33181 Bad Wünnenberg
1. Specification
1.1 Important information
!
Carefully study and observe all items of these operating instruc-
tions before commissioning the unit.
!
In principle, the Wöhler SP 22 should only be used by skilled
personnel for its intended purpose and within the specified range
of data. Any liability or warranty for results established or for de-
fects caused when using the unit is excluded by all means.
1.2 Applications
The digital sound level meter SP 22 provides automatic or manual ranging in
six measurement ranges from 30 to 130 dB. The unit features 0.1 dB resoluti-
on.
A background noise absorber permits you to measure sound levels accurate-
ly even in the presence of high background noise.
The meter allows you to select between fast and slow response times and A
and C weighting. A maximum hold function is provided.
Jacks on the meter provide both AC and DC analog output, while a digital
RS-232 interface allows you to use an optional cable to capture sound level
data on a PC.
12 Tel.: +49 2953 73-100 Fax: +49 2953 73-96100
Wöhler SP 22