Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GST 18 V-LI B Professional Originalbetriebsanleitung

OBJ_BUCH-2148-003.book Page 15 Wednesday, November 25, 2015 11:15 AM
11 SDS clamping lever for saw blade release
12 "PowerLight"
13 Contact protector
14 Handle (insulated gripping surface)
15 "PowerLight" button
16 Thumbwheel for stroke rate preselection
17 Button for charge-control indicator*
18 Battery charge-control indicator*
19 Stroke rod
20 Vacuum connection*
21 Vacuum hose*
22 Splinter guard
23 Steel sliding shoe*
24 Screw
25 Scale for mitre angle (only GST 18 V-LI B)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless Jigsaw GST 18 V-LI S GST 18 V-LI B
Article number 3 601 EA5 1.. 3 601 EA6 1..
Rated voltage V=
Stroke rate at no
-1
load n min
0
Stroke mm
Cutting capacity, max.
– in wood mm
– in aluminium mm
– in non-alloy steel mm
Bevel cuts (left/right),
max. °
Weight according to
EPTA-Procedure
1)
01:2014
– minimum kg
– maximum kg
Permitted ambient
temperature
– during charging °C
2)
– during operation
and during storage °C
Recommended
batteries GBA 18V... W
Recommended
chargers
1) depending on the battery pack being used
2) Limited performance at temperatures <0 °C
Bosch Power Tools

Noise/Vibration Information

Sound emission values determined
according to EN 60745-2-11.
Typically the A-weighted noise levels
of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
sum) and uncertainty K determined
according to EN 60745-2-11:
Sawing chipboard:
a
K
Sawing sheet metal:
a
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
18 18
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
550–2700 0–2700
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
23 23
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
120 120
significantly increase the exposure level over the total working
20 20
period.
8 8
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
– 45
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
2.1 2.1
accessories, keep the hands warm, organisation of work pat-
2.6 2.6
terns.

Declaration of Conformity

0...+45 0...+45
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
–20...+50 –20...+50
vant provisions of the directives 2009/125/EC (Regulation
GBA 18V... GBA 18V... 1194/2012), 2011/65/EU, until 19 April 2016:
GBA 18V... W
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
AL 18 ... AL 18 ...
the following standards: EN 60745-1, EN 60745-2-11,
GAL 3680 GAL 3680
EN 50581.
GAL 18...W GAL 18...W
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
(triax vector
h
h
h
English | 15
dB(A) 79 81
dB(A) 90 92
dB 3 3
2
m/s 7.5 6
2
m/s 1.5 1.5
2
m/s 8 8.5
2
m/s 1.5 1.5
1 609 92A 1SX | (25.11.15)