Technical Data; Declaration Of Conformity - Bosch GST 500 PE Professional Originalbetriebsanleitung

18 | English

Technical Data

Jigsaw
Article number
Stroke rate control
Rated power input
Stroke rate at no load n
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right),
max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltage and models for specific countries, these values
can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 83 dB(A); Sound
power level 94 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting wood:
2
a =5.5 m/s
h
Cutting sheet metal: Vibration emission value
2
a =5.8 m/s
h
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
2 609 932 532 | (25.7.07)
Downloaded from www.Manualslib.com
Professional
0 601 584 A..
W
spm
0
mm
mm
mm
mm
°
kg
values determined according
Vibration emission
, Uncertainty K=1.5 m/s
, Uncertainty K=1.5 m/s
manuals search engine
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
GST 500 PE
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
500
ning but not actually doing the job. This may sig-
500 – 3100 nificantly reduce the exposure level over the total
working period.
26
Identify additional safety measures to protect the
operator from the effects of vibration such as:
85
maintain the tool and the accessories, keep the
20
hands warm, organisation of work patterns.
10

Declaration of Conformity

45
We declare under our sole responsibility that the
product described under "Technical Data" is in
2.4
conformity with the following standards or
standardization documents: EN 60745 according
/ II
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
to
Senior Vice President
Engineering
27.06.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
value
2
.
Assembly
2
.
Replacing/Inserting the Saw Blade
Before any work on the machine itself, pull
the mains plug.
When mounting the saw blade, wear protec-
tive gloves. Danger of injury when touching
the saw blade.
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools