Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PST 750 PE Originalbetriebsanleitung

OBJ_BUCH-1065-006.book Page 14 Friday, September 26, 2014 1:54 PM
14 | English
17 Accessory holder
18 Contact protector
19 Screw
20 Scale for mitre angle

Technical Data

Jigsaw
Article number
"Cut Control"
Stroke rate control
Orbital action
Rated power input
Output power
Stroke rate at no load n
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 85 dB(A); Sound power level 96 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Cutting board: a
Cutting sheet metal: a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
1 609 92A 0R6 | (26.9.14)
Downloaded from www.Manualslib.com
0
(triax vector sum) and uncertainty K
h
2 2
=13 m/s , K=3 m/s ,
h
2 2
=7 m/s , K=1.5 m/s .
h
manuals search engine
21 Cutting mark, 0°
22 Cutting mark, 45°
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PST 750 PE PST 800 PEL PST 8000 PEL PST 8500 PEL
3 603 CA0 5.. 3 603 CA0 1..
–


W 530
W 290
-1
min 500–3000 500–3000
mm 20
mm 75
mm 12
mm 5
° 45
kg 1.9
/II

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-11.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 24.09.2014
Assembly
 Before any work on the machine itself, pull the mains
plug.
Replacing/Inserting the Saw Blade
 When mounting the saw blade, wear protective gloves.
Danger of injury when touching the saw blade.
3 603 CA0 1.. 3 603 CA0 1..
 
 
 
530 530 530
290 290 290
500–3000 500–3000
20 20
80 80
12 12
5 5
45 45
1.9 1.9
/II /II
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools



20
85
12
5
45
1.9
/II