Package Contents; Description (Fig. A); Assembly And Adjustment - DeWalt DE6251 Handbuch

E N G L I S H
Safety instructions
Observe the safety regulations in the instruction
manual of the Power Tool to be connected to
this attachment. Also observe any applicable
additional safety rules. Read the following safety
instructions before attempting to operate this
product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
4 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
6 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
Warning! The use of any accessory or attachment
or performance of any operation with this tool, other
than those recommended in this instruction manual
may present a risk of personal injury.
8 Have your Power Tool Attachment repaired
by an authorized D
Repair of your Power Tool Attachment being a
matter of precision and skill, always take it to
your D WALT Authorized Repair Agent.
E
en - 2
WALT repair agent
E

Package contents

The package contains:
1 Dovetailing attachment
1 Dovetail cutter 12.7 mm
1 Guide bush 10.8 mm for DW613, Elu MOF96(E)
1 Guide bush 10.8 mm for DW620, DW621,
Elu OF97(E)
1 Depth gauge
1 Allen key
2 Screws
1 Spacer
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

The dovetailing attachment DE6251 allows you to
make professional dovetail joints using your DW613,
DW620, DW621, Elu MOF96(E) or Elu OF97(E) router.
1 Dovetailing template
2 Locking knobs for front vice
3 Front vice
4 Top vice
5 Locking knobs for top vice
6 Mounting holes
7 Left locator pins
8 Right locator pins
9 Adjustment washers
10 Securing knobs
11 Template fingers

Assembly and adjustment

Also refer to your router manual.
Preparing the dovetailing attachment (fig. A)
• Use the two screws supplied to mount the
dovetailing attachment to a board. For this
purpose, the base has mounting holes (6).
Make sure that the front edge of the
base of the attachment projects beyond
the board.
11